The UniFi Access Hub comes with versatile interfaces, including support for most electric bolts/strikes, magnetic locks, and 12V access accessories such as motion sensors, push buttons, and alarms. The three Ethernet PoE powered reader interfaces minimize need for wiring work and offer a convenient way to add a UniFi G3-Flex surveillance camera for
A convenient door access scanner supporting NFC reader and handwave door unlocking.
UA-Reader Lite Overview
Type: Compact access control reader.
Compatibility: Designed to work with various access control systems.
Connectivity: Typically supports both wired and wireless options for easy integration.
User-Friendly Interface: Simple design for quick and intuitive operation.
LED Indicators: Visual feedback for user status (access granted/denied).
Durability: Built to withstand typical environmental conditions for reliable use.
Versatile Application: Suitable for residential, commercial, and institutional settings.
Mechanical
Dimensions 94.9 x 40 x 31.1 mm (3.7 x 1.6 x 1.2")
Weight 67 g (2.4 oz)
Enclosure material Polycarbonate
Mounting options Wall-mount, gang box mount*
*The UA-Reader Lite must be installed either indoors or under a roof eave outdoors.
Weatherproofing IP54
Hardware
Networking interface 10/100 MbE
Max. power consumption 6W
Power method PoE
UL 294 Power-limited Class 2 PSU
UL 60950-1/62368-1 LPS/PS2 PSU
Supported voltage range 44–57V DC
Button (1) Factory reset
LEDs White/Blue
Connectivity Ethernet, BLE 4.1
NFC frequency 13.56 MHz
NFC reading range <30 mm
NFC standards ISO 14443A, 14443B, 15693
NFC technology NFC Tag 1, 2, 3, 4, 5
MIFARE Classic
MIFARE Plus
MIFARE Ultralight
MIFARE DESFire
Operating environment Outdoor use
Ambient operating temperature -20 to 40° C (-4 to 104° F)
Ambient operating humidity 5 to 90% noncondensing
Software information The software version of a product can be checked at https://unifi.ui.com
UL 294 level Destructive attack: Level I
Line security: Level I
Endurance: Level I
Standby power: Level I
UL 294 statement Compliance with IEEE 802.3 specifications was not verified as part of UL 294. The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
PoE cabling requirements Cable 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site.
The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm 2 ) for patch cords; 24 AWG (0.21 mm 2 ) for horizontal or riser cable.
CAN/ULC-60839-11-1 Grade Grade assignment: I
Certifications CE, FCC, IC, UL 294, CAN/ULC-60839-11-1
Document number, and issue date and/or revision level UA-Reader Lite, V02
Brand:
Ubiquiti
Unlock using an NFC card or UniFi Identity mobile app
Additional handwave unlock functionality
Connects to UniFi Access Hub using PoE
