The ELK-110 Voice “Talking” Driver features high quality digitally pre-recorded voice messages and loud attention getting siren sounds in an economical, low current draw, compact package. It features three input channels (1 for Burglar, 1 for Fire, and 1 for Carbon Monoxide), bilingual voices (English and Spanish), and many unique options which allow it to be used with virtually any residential or commercial alarm installation. The voice messages and the siren alternately sound whenever one of the channels are activated.
The ELK-110 may be customized by use of on-board jumpers. For example: our MilliMiser™ option allows the already low current draw of the ELK-110 to be reduced even lower. This is ideal for controls with limited alarm output power. The ComboTrigger™ option allows controls which have a single alarm output and pulsing option to activate both the burglar and fire alarm sounds. The VolumeStep™ option is best described as the "peacekeeper", since it causes the siren sound to start at low volume, gradually increasing over 90 seconds to maximum volume.
Operating Voltage: 10 to 14 Volts DC
Current Draw: 1.25 Amps, (800 mA on MilliMiser™ setting), with one 8 Ohm speaker
Sound Level: 122 db @ 1 meter, 14 vdc, with one 8 Ohm speaker
Max. Speaker Load: 4 Ohms
Size: 2.75" x 4.0" (70mm x 102mm)
Brand:
ELK Products
Installer Friendly - Compact & Easy to Mount
Three Input Channels, Burglar, Fire, and Carbon Monoxide
Bilingual Voice - English and or Spanish, Siren Only, Speech Only, or Combined
MilliMiser™ Lowers Current Draw
ComboTrigger™ For Single Outputs
VolumeStep™ Slowly Increases Siren Volume
Temporal 3 Coded Fire Signal
Temporal 4 Coded CO Signal
Lifetime Limited Warranty
