This 850 nm VCSEL 10 Gigabit SFP+ transceiver is designed to transmit and receive optical data over 50/125 μm or 62.5/125 μm multimode optical fiber. This transceiver accepts 2 LC connectors. The SFP+ SR module electrical interface is compliant to SFI electrical specifications. The transmitter input and receiver output impedance is 100 Ohms differential. Data lines are internally AC coupled. The module provides differential termination and reduces differential to common mode conversion for quality signal termination and low EMI. SFI typically operates over 200mm of improved FR4 material or up to about 150mm of standard FR4 with one connector.
Cleerline SSF-SFP-MM10G 10G MM SFP+ Transceiver
Features & Benefits:
Optical interface compliant to IEEE 802.3ae 10GBASE-SR
Compliance: MSA SFF-8431, RoHS
Hot Pluggable
850nm VCSEL transmitter, PIN photo-detector
Maximum link length of 300m on 2000MHz/km MMF
Operating case temperature: 0 to 70°C
Low power consumption
All-metal housing for superior EMI performance
Advanced firmware allow customer system encryption information to be stored in transceiver
Cost effective SFP+ solution, enables higher port densities and greater bandwidth
Manufacturer Cleerline SSF
Equipment Type Fiber Transceiver
Manufacturer Part Number SSF-SFP-MM10G
Website Cleerline SSF
Optical interface compliant to IEEE 802.3ae 10GBASE-SR
Compliance: MSA SFF-8431, RoHS
Hot Pluggable
850nm VCSEL transmitter, PIN photo-detector
Maximum link length of 300m on 2000MHz/km MMF
Operating case temperature: 0 to 70°C
Low power consumption
All-metal housing for superior EMI performance
Advanced firmware allow customer system encryption information to be stored in transceiver
Cost effective SFP+ solution, enables higher port densities and greater bandwidth
