Evolution EV4KWHDMI

4K Wireless HDMI Extender with HDMI Loop-Out

EV4KWHDMI

A plug and play solution for applications where a cable cannot be run, such as a TV mounted above a mantel or outdoors on a patio.

The Evolution by Vanco EV4KWHDMI Wireless HDMI Extender with IR, extends 4K ultra-high definition video and audio signals up to 164ft/50m wirelessly. Directional IR allows for the source to be controlled wirelessly at the display location. Features an HDMI loop-out, where an additional local display can be connected. With no line of sight required, the wireless signal can travel through floors and walls. If a WiFi signal can reach it, the EV4KWHDMI can.

• TX weight: 0.78lbs (353g)
• TX dimensions 4.5in x 4.9in x 0.8in (115mm x 125mm x 20.6mm)
• RX weight: 0.77lbs (346g)
• RX dimensions: 4.5in x 4.9in x 0.8in (115mm x 125mm x 20.6mm)

Package contents:

• (1) Transmitter unit (TX)
• (1) Receiver unit (RX)
• (2) 5V/2A power adapter
• (1) IR receiver extension cable
• (1) IR blaster extension cable
• (4) Antennas
• (4) Mounting ears
• (10) Screws
• (2) Grounding screws
• (1) Quick start guide

• Supports up to 4K@60Hz resolution
• Wireless transmission up to 164ft/50m (line of sight) of low-latency UHD signals
• HDMI loop-out to connect an additional local display
• HDCP 2.2/1.4 compliant
• Supports LPCM 2.0ch 32KHz/44.1KHz/48KHz Audio Formats
• SSID pairing and channel switching to avoid interference
• IR pass-through to control the source at the display location wirelessly

• Cutsheet