Vaddio 999-9575-000

Cisco Codec Kit for OneLINK HDMI to Vaddio HDBaseT Cameras

999-9575-000

Extends power, HDMI video and control to your Vaddio HDBaseT camera over a single category cable. Packaged for Cisco SX20*, SX80 or C-Series codecs; compatible with RoboSHOT 12E and 30E HDBT, RoboSHOT 20 UHD, RoboSHOT 40 UHD, RoboSHOT IW and DocCAM 20 HDBT.

For Cisco Telepresence SX20*, SX80 or C-Series codecs; compatible with RoboSHOT 12 and 30 HDBT, RoboSHOT 20 UHD, and DocCAM 20 HDBT.

More Flexibility for Room Design and Installation

Tailored for Cisco codec systems and compatible with Vaddio's HDBaseT cameras, this OneLINK codec kit provides more freedom of choice for camera selection and equipment placement.

*Please note: When connecting a Cisco SX20 codec to a OneLINK HDMI, you will need to provide a Cisco CAB-PHD4XS2-SPLIT cable.

This Package Includes:

• OneLINK HDMI Interface
• Quick-start card
• 48V power supply with AC cord set(s)
• 3' (0.9m) cat-5 cable, black
• 3' (0.3m) directional cat-5 cable for Cisco SX20**
• 3' (0.9m) HDMI cable
• EZCamera RS-232 Control Adapter
• EZCamera RS-232 Control Adapter 998-1002-232 for Cisco codec serial 9-pin ports

**If connecting to a Cisco SX20 codec, a user-supplied Cisco CAB-PHD4XS2-SPLIT cable is required

• Simple, clutter-free camera extension with HDBaseT technology
• Power, video and control over a single Cat-5e cable up to 230 ft. (70m), or over a Cat-6 cable up to 328 ft. (100m)
• More flexibility in camera and/or codec placement no longer dependent on the location of the codec
• HDBaseT interface extends power, video and control up to 328 feet/100 meters Cisco systems can now go into larger rooms
• Plug and play usability
• Intuitive browser-based user interface for configuration and system administration

• Quick Start Guide