AVPro Edge AC-MXNET-1G-DV2-W

MXnet 1G Evolution II Weatherproof Decoder

AC-MXNET-1G-DV2-W

Weatherproofed Video Distribution

Protecting delicate electronics with weatherproof solution creates a virtually invisible, durable, waterproofing protective layer that works primarily with AVPro Edge's own computer boards and components. The nano-coating creates a formidable barrier on circuitry that encapsulates the electronic components, protecting against water, moisture, humidity, dust, salt-air, and corrosion of various types.

AVPro Edge MXnet Decoder gets the full waterproof treatment.

The team does more than coat our extenders and decoders with their magic liquid. They also ensured the chassis were sealed correctly with extensive testing:

• Testing overarching effectiveness of weatherproof Treatment.
• Testing on the Receiver units was done as hybrid applications meaning outdoor, covered, and in full direct rain situations. Testing for environments with heat, humidity, salt fog, rainfall, and more.
• Rated IP68

The rainfall testing had the most significant impact on the functionality of the units. All control units failed immediately when the water was turned on.

A significant portion of protection is a coating made from a nanofluid developed explicitly for electronic boards. Ensure you have the tools to extend the life of installations in harsher conditions.

JPEG 2000: JPEG 2000 encoding implemented by MXnet differs from MPEG and other discrete cosine transform-based codecs, as it optimizes compression efficiency for applications with limited bandwidth. JPEG 2000 is based on a wavelet transform algorithm, providing lossless or lossy compression and parseable code streams. Genlock is supported, syncing a video source by frame to Decoders comprising a video wall, for a simul-sync, tear-free appearance.

Decoded image fidelity from Evolution II AC-MXNET-1G-DV2 decoders has been substantially improved with the new AVPro Edge ASIC, working in tandem with Evolution II AC-MXNET-1G-EV2 encoders. JPEG 2000 is reliably used by Digital Cinema Initiatives for theatrical content, by television networks for HD broadcasting, and by DICOM® for critical, decision-making, medical imaging applications.

4K/60fps Support: First-generation MXnet Encoders and Decoders were unable to support 4K/60fps 4:4:4 RGB or YCbCr, 10- and 12-bit or with dynamic metadata.

When not lossless, the advanced encoding / decoding engine resident on the new ASIC developed for EVO II Encoders and AC-MXNET-1G-DV2 Decoders applies a limited, ultra-light compression, composing an artifact free image upon decoding, including Dolby Vision or HDR10+ content.

High Bitrate Multi-channel Audio Support: Dolby Atmos and DTS:X for IMAX Enhanced are now supported.

Data Status Window: A forward-facing, built-in mini OLED screen displays information critical to device set up, system troubleshooting, or standard operational status. Custom name an EVO II AC-MXNET-1G-DV2 with up to twelve allotted character slots for easy identification or to match your system requirements. IP and MAC addresses are also displayed.  

Control Signal Routing: AC-MXNET-1G-DV2 decoders receive IR and RS-232 control signals that have been mapped with MXnet Mentor software then packeted for multicast by AC-MXNET-1G-EV2 encoders. I-PASS and IR-EYE ports support IR signal throughput from third-party over-control systems to AC-MXNET-1G-DV2 decoders and endpoint-connected products.

USB and KVM Support: Each Decoder unit has two USB ports. You may also connect a USB hub if needed to expand the number of USB ports. Connect and route any USB signals back to the Encoder Host. Use the MXnet Mentor software to specify the Host Encoder, and the upstream USB device connected the selected Decoder.

External Device Light Control: Light emission from an AC-MXNET-1G-DV2 may be controlled via MXnet Mentor. Any status light, including network link LEDs and the OLED Data Window may be optionally disabled to prevent unwanted distraction, enabling discreet placement where desired. Device lights may also be continuously flashed for high visibility when troubleshooting.

Netgear Support  MXnets engineers have worked together with Netgear to ensure their switches work with our line of encoders and decoders. To make installing MXnet with Netgear switches even easier, Netgear has developed an AVPro Edge Profile. Once this is loaded, your switch will work seamlessly with the AVPro Edge encoder and decoders. 

For more information, please visit this website - https://www.netgear.com/business/solutions/av-over-ip/

• Protects against Direct Rain
• Protects against Dust and Humidity
• Protects against Sea and Salt Fog
• Protects against Some Chemicals
• Protects against Heat

• Cutsheet
• Manual