Altronix NetWay4EWPX

4-Port PoE+ Hardened Switch with Outdoor Enclosure

NetWay4EWPX

Altronix NetWay4EWPX Outdoor PoE+ Hardened Switch provides a 1Gb SFP port and four (4) PoE+ (30W) ports. Cameras/edge devices may be located up to 100m from the unit. Embedded LINQ Technology allows you to monitor, control and report power and diagnostics from anywhere.

Input

• Voltage: 115VAC, 60Hz, 2.5A or 230VAC, 50/60Hz, 1.3A
• Input Fuse: 5A/250V

Power Output

Maximum Power

• Four (4) 10/100/1000 Mbps
• PoE/PoE+ (up to 30W) ports or IEEE 802.3af (15W) and IEEE 802.3at (30W) compliant
• 120W total power
• Integral surge protection

Fiber Port

• One (1) Gigabit SFP port

LED Indicators

• Individual PoE On LEDs for each port
• Individual IP Link status, 10/100Base-T/active LEDs for each port
• ALOS LED indicates fiber connection for SFP port
• Heartbeat LED indicates proper operation of the unit

LINQ Technology

• Remote network management allows for camera/device reset and monitoring
• Provides local and/or remote access to critical information via LAN/WAN
• Email and Windows Dashboard Alert notifications report real-time diagnostics
• Event log tracks history

Battery Charging

• Capacity: 4AH/12VDC (4 within enclosure)
• Type: Sealed lead acid or gel type
• Failover Upon AC loss, instantaneous
• (Batteries are sold separately).

Temperature

Operating:

• 60W: 40ºC to 75ºC ( 40ºF to 167ºF)
• 75W: 40ºC to 70ºC ( 40ºF to 158ºF)
• 100W: 40ºC to 55ºC ( 40ºF to 131ºF)
• 120W: 40ºC to 45ºC ( 40ºF to 113ºF)

Storage:

• 40ºC to 85ºC ( 40ºF to 185ºF)

Relative Humidity

• 85% +/ 5%

BTU/Hr. (approx.)

• 61 BTU/Hr.

Operating Altitude

• - 304.8 to 2,000m.

• Cutsheet
• Manual