Altronix Tango1B

PoE Power Supply Board with Lithium Battery Backup

Tango1B

Altronix Tango1B PoE Driven Power Supply/Charger converts an IEEE802.3bt PoE input into a regulated 24VDC and/or 12VDC output up to 72W. Ideal access installations, it eliminates the need for a high voltage power supply inside of an enclosure. The Tango 8-pin connector allows for stacking with compatible Altronix sub-assemblies such as ACMS8(CB), LINQ8ACM(CB) or PDS8(CB) saving valuable enclosure space. Tango1B is designed to support a single 12V LiFePO₄ (Lithium Iron Phosphate) battery for high storage and charge/discharge cycle life reliability.

Ethernet Input

• 802.3bt PoE up to 90W or 802.3at up to 30W or 802.3af up to 15W.
• CAT-6 or higher cable is recommended for optimum performance.

Power Output

• (when using 802.3bt 90W):
• 12VDC up to 6A (72W) and/or 24VDC up to 3A (72W). Combined output not to exceed 72W.

When charging batteries:

• 12VDC up to 5A (62W) and/or 24VDC up to 2.7A (62W). Combined output not to exceed 62W.

Ethernet Output

• Pass-through Ethernet Port (data only).
• 100/1G

Battery Charging

• Battery fuse reading 10A/32V.
• Automatically adjusts between Lead Acid and Lithium Iron Phosphate batteries.
• Unique technology allows for single battery to backup 12VDC and/or 24VDC systems.
• Low power shutdown. Shuts down DC output terminals if battery voltage drops below 80% of nominal. Prevents deep battery discharge.
• (Batteries are sold separately).

Supervision

• Loss of PoE Input.
• Battery Supervision.

Visual Indicators

• Input indicates input voltage is present.
• Battery status indicates battery trouble condition.
• PoE Class indicator.
• Supervision PoE Fail or BAT Fail.

Additional Features

• Short circuit and overload protection.

Physical and Environmental

Temperature:

• Operating: 0° C to 49° C (32° F to 120° F).
• Storage: - 20° C to 70° C ( - 4° F to 158° F).

Relative Humidity:

• Relative Humidity: 85% +/- 5%.

BTU/Hr. (approx.):

• 54 BTU/Hr.